Kayleen Import & eXport
Powered By esiafrica.net
Copyright © 2009 Kayleen Import and Export
AEROSHELL GREASE 6
"AeroShell Grease 6" is a general purpose grease composed of a mineral oil thickened with Microgel, possessing good all-round properties within a limited range. It is inhibited against oxidation and corrosion and has good water resistance and low noise capability.
The operating range is -40 to +121
Conforms to the specifications: MIL-PRF-24139A, DEF STAN 91-12, DCSEA 382/A, XG-271.
AEROSHELL GREASE 7
"AeroShell Grease 7" is an advanced multi-purpose grease, composed of a synthetic oil thickened withMicrogel, possessing good load carrying ability over a wide temperature range. It is inhibited agains corrosion and has excellent resistance to water.
AeroShell Grease 7 satisfies nearly all the airframe grease requirements of turbine engined aircraft and also those of piston engined aircraft provided that seal incompatibility does not occur.
The operating range is -73 to +149
Conforms to the specifications: MIL-PRF-23827C,DCSEA 354/A.
AEROSHELL GREASE 14
"AeroShell Grease 14" is a helicopter multi-purpose grease composed of a mineral oil thickened with a calcium soap, possessing outstanding anti-fret and anti-moisture corrosion properties. It is oxidation and corrosion inhibited.AeroShell Grease 14 is a particularly suitable for the lubrication of helicopter main and tail rotor bearings, splines, etc.
Conforms to the specifications: MIL-G-25537C, DEF STAN 91-51,XG-284.
AEROSHELL GREASE 15
AeroShell Grease 15 is an extreme temperature range grease, composed of silicone oil with organic thickener. AeroShell Grease 15 is inhibited against corrosion and oxidation, and possesses excellent high temperature and mechanical stability properties and low evaporation rate.
Recomended for use in lightly loaded ball and roller bearings.
Conforms to the specifications: MIL-G-25013E, DEF STAN 91-55, XG-300.
AEROSHELL GREASE 22
"AeroShell Grease 22" is especially recommended for use wherever severe operating conditions are encountered as in high bearing loads, high speeds, wide operating temperature range, and particularly where long grease retention and high resistance to water washout are required.
The wide range of applications include aircraft wheel bearing, engine accesoires, control systems, actuators, screw-jacks, servo mechanisms and electric motors, helicopters, rotor bearings, instruments, airframe lubrication, hinge pins, static joints, landing gears.
May be used as analogue of Russian greases CIATIM-201, CIATIM-203, CIATIM-221, VNII NP-207, ERA (VNII NP-268M) and NK-50.
Conforms to the specifications: MIL-PRF-81322F, DOD-G-24508A, DEF STAN 91-52 and others.
AEROSHELL GREASE 33
AeroShell Grease 33 is a synthetic universal airframe grease with corrosion and oxidation inhibitors and load carrying additives.
AeroShell Grease 33 can be used for routine lubrication on aircraft manufactured by Boeing, McDonnell, Douglas, Airbus, Bae Regional Aircraft, Canadair, Lockheed, Embraer, Fokker and Gulfstream. Conforms to the specifications: MIL-PRF-23827C, BMS 3-33 and others.