Kayleen Import & eXport
Powered By esiafrica.net
Copyright © 2005 Kayleen Import and Export
It is low-viscosity petroleum oil, thickened by lithium stearate, it contains antioxidant additive.
Instrument grease is applied in friction and frictionless bearings, gear drives, aerotechnics control systems. Lubricant works at a temperature from 60to + 90
It is petroleum transformer oil, thickened with lithium soap of technical fat oil and sulfurized acidol. It contains thickening and antiscuff additives.
Low-temperature grease is used in friction and frictionless bearings, gear drives, screw pairs, loaded control system reducers. Lubricant works at temperatures from 50 to + 100. It surpasses Ciatim-201 by chemical and colloid stability, water resistance and wear-resistant characteristics.
Ciatim-205 is used for lubricanting screwed and contact joints and sealing used in corrosion environment. Resistant to exposure to concentrated mineral acids, alkalis, amines, spirits and hydrazines. Can be used at temperatures of -60 to +50
Organ-silicon fluid, thickened with complex soap; it contains antioxidant additive.
This thermostable grease is applicable in electric machine friction bearings, control systems and devices with rotation speed up to 10 000 min-l. The lubricant works at residual pressure 666.5 Pa in the temperature range from 60 to + 150
This is MS-20 oil thickened with soda soap of stearic and oleic acids. It contains colloidal graphite.
It is used for aircraft undercarriage hub bearings. The old name for this grease is NK-50- air engine refractory ST.
It works at temperatures from -15 to +120
It is a blend of organic-silicon fluid and petroleum oil, thickened with lithium stearate and ceresin.
It is used in aviation electric machine bearings. The grease is operative at the temperatures from 40 to + 100
ERA (VNII NP-286M)
The grease is applied in friction and frictionless bearings, gear drives of electric equipment and of aviation control systems. It is active at a temperature from 60 to +120
Atlanta (VNII NP-254)
It contains a package of metal plating additives. The grease is used in sliding friction units working at alternate load, in needle-shaped and screw mechanisms.
The grease is operative at temperatures between 60 and + 150, in short-time up to 200
Sapfir (VNII NP 261)
It is used in taper roller bearings of aircraft undercarriage wheel hubs.
The lubricant works at temperatures from 60 to + 150, shortly up to 200
This is polymethylphenylsiloxane fluid thickened with colloidal graphite.
The thermostable grease is used in aviation friction units, low-speed frictionless bearings, screw ball joint drives. It works at temperatures between 30 to + 300, for short time periods up to 400
This is a mixture of esters thickened with complex calcium soap. It contains antioxidant and antiwear additives.
It is used for lubrication of frictionless bearings of electric equipment (electric generators, starter-generators) and aircraft. It works at temperatures from 60 to + 180
These are high-viscosity petroleum oils, thickened with aluminum soap of stearine acid.
Sea-water grease are used for hydroplanes and other aircraft sea water protection.
The greases are operative at temperatures from 0 to + 70; grease AMS-1 is applied at temperatures from 15 to + 65
VNII NP 207
It is a blend of organic-silicon fluid and synthetic hydrocarbon oil thickened with complex soap. It also contains antioxidant additive.
The thermostable lubricant is used in electric machinery frictionless bearings and starter-generators with rotational speed up to 10 000 min-1. The lubricant works at residual pressure 666.5 Pa in the temperature range from 60 to + 200
It is organic-silicon fluid thickened with fine dyspersated molybdenum disulphide. The fluid also has stabilizing additive. It is used in threaded joints and high loaded low-speed units. It works at the temperatures between 60 and +250 (aluminum alloys), between 60 and +350 (alloyed steels), between 40 and + 300 (low-speed friction units).
This is organic-silicon blend thickened with technical carbon DG-100.
The thermostable lubricant is used in close worm-screw mechanisms, low-speed frictionless and friction bearings. The lubricant works at residual pressure 666.5 Pa in the temperature range from 60 to + 250
This is medium-viscous petroleum oil thickened with lithium stearate.
The break-in oil is used in frictionless bearings, toothed bearings, screw gears and high load low-speed friction units. It works at the temperatures from 50 to + 300C.
This is perfluorinepolyether thickened with inorganic agent.
Chemically stable lubricant is used in respiratory apparatus, threaded joints and friction units contacting with different mediums, including oxygen gas. The lubricant works at temperatures from 45 to + 150
9 is a low-viscosity petroleum oil thickened with bariumplumbum soap of stearine acid.
It is applied in lubrication in some specific friction units
PVK is petroleum oil thickened with petrolatum and ceresin. It contains antioxidant additive.
Preservation lubricant is applied for rust protection and used for metal conservation. The lubricant works at the temperatures from 50C to + 80C.